MIL-A-23940 - Adhesive, Silicone Rubber (S/S By Mil-A-46106)
MIL-A-23941 - Adhesive, Epoxy Type, Two Part
MIL-A-23946 - Ammonium Perchlorate For Solid Propellant Grains
This specification establishes the minimum requirements for a special grade ammonium perchlorate for the solid propellant grains Mark 75 and March 76.
MIL-A-23948 - Ammonium Perchlorate Special Coarse Grade For Solid Propellant Grains
This specification establishes the minimum requirements for a special coarse grade ammonium perchlorate for the solid propellant grains Mark 75 and Mark 76.
MIL-B-18975 - Booster, Missile, Mark 3 All Mods
MIL-B-22450 - Booster, Guided Missile, Mark 12 Mod 0 (Loaded Assembly)
This specification covers one type of solid propellant booster designated as MK 12 MOD O.
MIL-B-22883 - Booster, Guided Missile Mark 12 Mod 0 (Inert Assembly) (S/S By Mil-R-23021)
MIL-B-23297 - Booster, Guided Missile, Mark 12 Mod 1 (Loaded Assembly)
This specification covers one type of solid propellant booster designated as MK 12 MOD 1.
MIL-B-85349 - Booster, Fuze, Mark 60 Mod 1
This specification establishes the requirements for manufacture and acceptance of the MARK 60 MOD 1 Fuze Booster critical item, referred to herein as the booster.
MIL-B-85464 - Booster, Fuze, Mark 38 Mod 2
This specification establishes the requirements for manufacture and acceptance of the MARK 38 MOD 2 Fuze Booster.
MIL-B-85599 - Booster, Fuze, Mark 60 Mod 2
This specification establishes the requirements for manufacture and acceptance of the MARK 60 MOD 2 Fuze Booster.
MIL-B-85685 - Booster, Fule, Mark 60 Mod 3
This specification establishes the requirements for manufacture and acceptance of the MARK 60 MOD 3 Fuze Booster.
MIL-C-23947 - Compounding Oil
This specification establishes the minimum requirements for a special grade of low molecular weight napthenic ail of moderate aromatic content to be used as an aid in processing the Mk 75 and Mk 76 solid propellant grains.
MIL-C-48601 - Circuit Card Assembly: 11746960 Switch And Light Control
MIL-C-48670 - Charge Assembly For M207E5 Or M207E6 Warheads Inert Parts, For
This specification covers the quality assurance provisions and special requirements not covered by the drawings for the fabrication of the parts for the Charge Assembly for the M207E5 Warhead.
MIL-D-23660 - Data, Technical For Rocket Motors
This specification covers requirements for the technical data to be prepared during the development program of rocket motors.
MIL-D-45497 - Detonator, Electric, M51, Parts For
MIL-D-46253 - Detonator, Electric, T20E1, Parts For, And Loading, Assembling And Packing
This specification covers the inspection of the parts and the loading, assembling and packing for one type of electric detonator designated as Detonator, Electric, T20E1.
MIL-D-46254 - Detonator, Electric, T20E1, Parts For (S/S By Mil-D-46253)
MIL-D-48175 - Detonator, Electric, Patriot Parts, Assembling, Loading And Packing For
This specification covers the inspection requirements for the fabrication of parts, assembling, loading and packing for one type of one watt/one ampere Detonator, Electric, Patriot (see 6.1).
MIL-D-82687 - Device, Arming Firing, Rocket Motor Mark 298 Mod 0
This specification establishes the performance, design, development, and test requirements for the MARK 298 MOD 0 Rocket Motor Arming-Firing Device critical item, referred to herein as the A-F device.
MIL-D-85465 - Device, Safety And Arming, Fuze Fsu-10/A
This specification establishes the requirements for manufacture and acceptance of the FSU-10/A Safety and Arming Device, Fuze, referred to herein as the fuze.
MIL-D-85580 - Device, Safety And Arming, Fuze Dummy, Fsu-10(D-1)/A And Device, Safety And Arming, Fuze, Training, Fsu-10(T-1)/A
This specification establishes the requirements for manufacture and acceptance of two types of fuzes as classified in 1.2 and described in 3.1.
MIL-DTL-23938 - Ferric Oxide
This specification establishes the requirements for ferric oxide.
MIL-E-46417 - Explosive Harness Assembly, Missile Rocket, Xm 38E1, Assembling And Packing
MIL-E-46430 - Explosive Harness Assembly, Missile-Rocket Xm38E1, Parts For
MIL-E-46510 - Explosive Harness Assembly Missile Rocket, Xm84, Parts For
This specification covers the parts for one type explosive harness designated as Explosive Harness Assembly, Missile-Rocket, XM84.
MIL-E-46511 - Explosive Harness Assembly Missile-Rocket, Xm84 Loading, Assembling And Packing
MIL-E-46596 - Explosive Harness Assembly, Guided Missile, T55, Parts For
MIL-E-46597 - Explosive Harness Assembly, Guided Missile, T55, Loading, Assembling And Packing
MIL-F-48137 - Fuze, Gm, Et, Lance, Xm819 Parts, Loading, Assembling And Packing
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, loading, assembling and packing of one type of fuse designated as Fuze, GM, ET, Lance, M819A1.
MIL-F-48370 - Fuze M934E6, Hybrid Microcircuits For
This specification establishes the performance, test, manufacture and acceptance requirements for hybrid microcircuits, hereinafter to be called hybrids, to be used in the M934E6 Stinger fuze.
MIL-F-48382 - Fuze, M934E6, Impact Switch For
This specification establishes the performance, test, manufacture and acceptance requirements for the impact switch for use in the M934E6 Fuze assembly.
MIL-F-48388 - Fuze, M934E6, Launch Sensing Switch For
This specification establishes the performance, test, manufacture and quality assurance requirements for the launch switch for use in the M934E6 Fuze Assembly.
MIL-F-48863 - Fuze, Guided Missile, M934E6 Parts Assembly, Loading And Packing For
This specification contains the performance requirements and quality assurance provisions for the fabrication and acceptance of components, assemblies, loading and packaging for one type of fuze designated as Fuze, Guided Missile, M934E6.
MIL-F-50823 - Fuze, Gm, Et, Lance, M811 Parts, Loading, Assembling And Packing
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, loading, assembling and packing of one type of fuze designated as Fuze, GM, ET, Lance, M811.
MIL-F-50913 - Fuze, Gm, Training, Lance, M816 Metal Parts, Assembling And Packing
This specification covers metal parts, assembling and packing for one type of fuze designated as Fuze, Guided Missile, Training, M816.
MIL-F-63051 - Fuze, M934 Series, Actuators For
This specification establishes the performance, test, manufacture and acceptance requirements for the arming and abort actuators to be used in the M934 Series Fuze.
MIL-F-63412 - Fuze Probe Assembly, Pneumatic Assembling And Packing (Tow)
This specification contains requirements not covered by the drawings and provides quality assurance provisions for fabrication of parts, assembly and packing of one type of probe.
MIL-F-63434 - Fuze Probe Assembly, Spring, Assembling And Packing (Tow)
This specification contains requirements not covered by the drawings and provides quality assurance provisions for fabrication of parts, assembly and packing of one type of fuze probe for use in the Improved TOW Missile.
MIL-F-85399 - Fuze, Guided Missile, Fmu-138/B
This specification establishes the requirements for manufacture and acceptance of the FMU-138/B Guided Missile Fuze, referred to herein as the fuze.
MIL-F-85400 - Fuze, Guided Missile, Dummy Fmu-138(D-1)/B
This specification establishes the requirements for manufacture and acceptance of the FMU-138(D-1)/B Dummy Guided Missile Fuze, referred to herein as the dummy fuze.
MIL-F-85475 - Fuze, Guided Missile, Fmu-141/B
This specification establishes the requirements for manufacture and acceptance of the FMU-141/B Guided Missile Fuze, referred to herein as the fuze.
MIL-G-22253 - Generator, Gas Mk 1 Mod 0 Loaded Assembly
MIL-G-23949 - Grains, Tubular, Pyrotechnic
This specification establishes the minimum requirements for tubular pyrotechnic igniter grains for the Mark 265 Igniter.
MIL-I-14925 - Igniter Assembly, M76 Loading, Assembling And Packing
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the loading and assembling of one type of igniter designated as Igniter Assembly, M76.
MIL-I-23062 - Igniter, Mark 247 Mod O
This specification covers the requirements for an Igniter, Mk 247 Mod 0, a cartridge used as an igniter for solid propellant gas generators.
MIL-I-23951 - Ignition Material, Pelleted, Pyrotechnic
This specification defines the minimum requirements for one type of pelleted pyrotechnic ignition material.
MIL-I-63259 - Interface Module For Safety And Arming Device
This specification covers the Quality Assurance Provisions and special requirements for the fabrication of the Interface Module for the Improved HAWK M100 Safety and Arming Device.
MIL-L-85297 - Lead, Explosive Mark 24 Mod 0 Mark 25 Mod 0
This specification establishes the requirements for manufacture and acceptance of two types of explosive leads, referred to herein as the lead.
MIL-L-85602 - Lead, Explosive Mark 28 Mod O Mark 29 Mod O
This specification establishes the requirements for manufacture and acceptance of two types of explosive leads, as classified in 1/2 and described in 3.1.
MIL-M-14926 - Motor, Rocket, Launch, M114 Parts For
MIL-M-14927 - Motor, Rocket, Launch, M114 Loading, Assembling And Packing
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the loading, assembling and packing of one type of rocket motor designated as Motor, Rocket, Launch, M114.
MIL-M-23945 - Methyl Aziridinyl Phosphine Oxide (Mapo)
MIL-M-60994 - Missile, Bullpup, Center Section, H.E. Loading, Assembling And Packing
MIL-N-46569 - Nose Section, Guided Missile, M100, Assembly And Packing
MIL-N-81240 - Nozzle Insert, Silicon Carbide-Graphite
MIL-P-16594 - Projectiles, Bombs, Rockets, And Guided Missile Warheads, Inert Parts, Manufacture Of
This specification covers general requirements for the manufacture of the inert parts of projectiles, bombs, rockets (rocket heads and rocket motors), and guided missile warheads for the U.S. Navy.
MIL-P-23943 - Plastic Molding Compound, Glass Fiber Reinforced Phenolic Resin, Thermosetting
MIL-P-48698 - Probe And S&A Assembly, Tow-2/E6
This specification covers the requirements, quality assurance provisions, testing and packaging of a probe for use in the TOW-2A Guided Missile.
MIL-P-70661 - Potted Circuit Card Assembly For Tow-2E/6 Probe And S&A Assembly
This specification contains the requirements, quality assurance provisions, testing and packaging of an electronic assembly for TOW-2/E6 Probe and S&A Assembly.
MIL-P-85459 - Probe, Crush Sensor, Rh, Fzu-45/B And Lh, Fzu-46/B And Probe, Air-Pressure, Fzu/B
This specification establishes the requirements for manufacture and acceptance of two types of probes, referred to herein as the probe.
MIL-PRF-23942 - Polybutadiene, Linear, Carboxyl Terminated
This specification establishes the requirements for two types of carboxyl terminated linear polybutadiene used in the manufacture of solid propellant grains.
MIL-PRF-23950 - Aluminum Powder, Spherical
The specification defines the minimum requirements for four types of spherical aluminum powders used as propellant ingredients.
MIL-R-23021 - Rocket Motor, Manufacturing Inert Parts For, General Specification For
This specification covers the requirements for procurement of inert parts for rocket motors.
MIL-R-23139 - Rocket Motors, Surfaced Launched, Development And Qualification Requirements For
This specification defines the design requirements and acceptance test for surface launched rocket motors.
MIL-R-25533 - Rocket Motor, Aeronautical, Model Specification For (Outline And Instructions For Preparation)
MIL-R-25534 - Rocket Motor, Aeronautical, Qualification Test For
This specification establishes the qualification test requirements for rocket motors for aeronautical vehicles.
MIL-R-25535 - Rocket Motor, Aeronautical, Preliminary Flight Rating Test For
This specification establishes the preliminary flight rating test requirements for rocket motors for aeronautical vehicles.
MIL-R-25536 - Rocket Motor, Aeronautical, Acceptance Test For
This specification establishes the acceptance test requirements for rocket motors for aeronautical vehicles.
MIL-R-46466 - Rocket Motor, T52E3, Metal Parts And Assembling And Packing.
MIL-R-46469 - Rocket Motor, Xm10E2, Metal Parts For
MIL-R-46504 - Rocket Motor, Xm30, Loading, Assembling & Packing
MIL-R-46509 - Rocket Motor, M30, Metal Parts For
This specification covers requirements for themetal partsfor one type of rocket motor.
MIL-R-46963 - Rocket Motor, M42A1, Booster
MIL-S-14799 - Safety And Arming Device, Guided Missile: M114, M114E1, And M114E2 Loading, Assembling And Packing
This specification covers product and packaging requirements, and examinations and tests required for the fabrication of components, loading, assembling and packing of several types of safety and arming devices designated as Safety and Arming Device, Guided Missile: M114, M114E1, and M114E2.
MIL-S-14992 - Safety And Arming Device, Guided Missile: M118 Loading, Assembling And Packing
MIL-S-18974 - Sustainer, Missile, Mark 2 All Mods
MIL-S-22729 - Sustainer, Guided Missile, Mark 7 Mod 0 (Inert Assembly) (S/S By Mil-R-23021)
MIL-S-46612 - Skin Removal Assembly, Guided Missile, T-Parts For
MIL-S-46613 - Skin Removal Assembly, Guided Missile, T&Loading, Assembling And Packing
MIL-S-48685 - Safety And Arming Device, Guided Missile: M143E1 Electrical Parts And Assemblies For
This specification establishes the performance, tests, manufacture and acceptance requirements for Electrical Parts, Fire Board Assemblies and Logic Board Assemblies and Electrical Assemblies (see 6.1).
MIL-S-48686 - Safety And Arming Device, Guided Missile: M143E1 Mechanical Parts And Assembly For
This specification covers the Quality Assurance Provisions and special requirements for the fabrication of the Mechanical Assembly for the PATRIOT M143E1 Safety and Arming Device.
MIL-S-48687 - Safety And Arming Device, Guided Missile: M143E1 Loading, Assembling And Packing For
This specification covers the Quality Assurance Provisions and Special Requirements for the loading, assembling and packing for two types of Guided Missile Safety and Arming Devices designated as: (1) Safety and Arming Device, Guided Missile: M143E1-Loaded; (2) Safety and Arming Device, Guided Missile: M143E1-Inert (see 6.1).
MIL-S-50218 - Switch, Nose Crush Assembly, Assembling And Packing (Dragon)
This specification contains requirements not covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of nose crush switch.
MIL-S-63255 - Safety And Arming Device, Guided Missile: M143 Mechanical Parts And Assembly For
This specification covers the Quality Assurance Provisions and special requirements for the fabrication of the Mechanical Assembly for the PATRIOT M143 Safety and Arming Device.
MIL-S-63256 - Safety And Arming Device, Guided Missile: M143 (M143E1) Logic Circuit Hybrid For
This specification establishes the performance, test, manufacture and acceptance requirements for hybrid microcircuits, hereinafter to be called hybrids, to be used in the M143 (M143E1) Safety and Arming (S&A) Device.
MIL-S-63257 - Safety And Arming Device, Guided Missile: M143 Loading, Assembling And Packing For
This specification covers the Quality Assurance Provisions and Special requirements for the loading, assembling and packing for two types of Guided Missile Safety and Arming Devices.
MIL-S-63335 - Safety And Arming Device, Guided Missile: M143 Electrical Parts And Assemblies For
This specification establishes the performance, tests, manufacture and acceptance requirements for Electrical Parts, Fire Board Assemblies and Logic Board Assemblies and Electrical Assemblies (see 6.1).
MIL-S-85309 - Squib, Electric, Single Bridgewire
This specification establishes the requirements for manufacture and acceptance of a single bridgewire electric squib, referred to herein as the squib.
MIL-S-85333 - Safety Arming Device Mark 33 Mod 1
This specification establishes the requirements for manufacture and acceptance of the MARK 33 MOD 1 safety-arming device, referred to herein as the S-A device.
MIL-S-85354 - Switch, Inertia, Fuze
This specification establishes the requirements for manufacture and acceptance of the Fuze Inertia Switch, referred to herein as the switch.
MIL-STD-312 - Muzzle Impact Safety Test For Use In Development In Projectile Fuzes (Use Mil Std 331)
MIL-STD-313 - Impact Safe Distance Test For Use In Development Of Projectile Fuzes (S/S By Mil Std 331)
MIL-T-23944 - Tape, Preimpregnated, Bias, Non-Woven Continuos Glass Filament Reinforced Phenolic Resin
MIL-T-63439 - Tow 2 Fuze Probe
This specification covers the requirements, quality assurance provisions, testing and packaging of a fuze probe for use in the TOW 2 Guided Missile.
MIL-V-85402 - Valve, Air, Dual, Pyrotechnic Actuated Fzu-43/B
This specification establishes the requirements for manufacture and acceptance of the FZU-43/B Pyrotechnic-Actuated Dual Air Valve, referred to herein as the valve.
MIL-W-13726 - Warhead, Fragmentation, 11 Lb., M2
MIL-W-13820 - Warhead, Blast, Steel, Welded, Metal Parts Assemblies.
MIL-W-14051 - Warhead, Fragmentation, T37E3 And T38E3, Parts Assembly.
MIL-W-14718 - Warhead, Guided Missile, Training, Xm237E1, Loading, Assembling And Packing
This specification covers the quality assurance provisions for loading, assembling and packing of warhead designated as Warhead, Guided Missile, Training, XM237E1.
MIL-W-14742 - Warhead Section, Guided Missile, Practice, M220, Assembling And Packing
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packaging of one type of warhead designated as Warhead Section, Guided Missile, Practice, M220.
MIL-W-14743 - Warhead Section, Guided Missile He, M207 Less S And A Device Parts For
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of high explosive warhead section designated as Warhead Section, Guided Missile, HE, M207, Less S&A Device.
MIL-W-14746 - Warhead, Guided Missile, He, M155 Loading, Assembling And Packing
This specification covers the quality assurance provisions and special requirements not covered by the drawings pertaining to the loading, assembling and packing of high explosive warhead designated as Warhead, Guided Missile, HE, M155.
MIL-W-14960 - Warhead, Guided Missile He, Xm155E1, And Warhead, Guided Missile, Training, Xm237E1, Parts For
This specification covers quality assurance provisions and special requirements not covered by the drawings for the fabrication of the inert parts for Warhead, Guided Missile, HE, XM155E1 and for Warhead, Guided Missile, Training, XM237E1.
MIL-W-14980 - Warhead, Guided Missile, He, M224 Parts For
This specification contains requirements not covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of warhead designated as Warhead, Guided Missile, HE, M224.
MIL-W-14993 - Warhead Section, Guided Missile, Practice, M231
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of warhead section designated as Warhead Section, Guided Missile, Practice: M231.
MIL-W-45173 - Warhead, Fragmentation, 11 Lb, M2, Loading, Assembling, And Packing
MIL-W-45175 - Warhead, Fragmentation, 179 Pound, M3, And Warhead, Fragmentation 122 Pound, M4 Loading, Assembling And Packing
MIL-W-45409 - Warhead, Guided Missile, Inert, Xm15, Parts For
MIL-W-45410 - Warhead, Guided Missile, Inert, Xm15, Assembling And Packaging
MIL-W-45466 - Warhead, Guided Missile He, Xm5E5 Parts For
MIL-W-45475 - Warhead, Guided Missile, He, Xm5E5 Loading, Assembling And Packing
This specification covers the quality assurance provisions, and special requirements not covered by the drawings, pertaining to the loading, assembling and packing of high explosive warheads designated as Warhead, Guided Missile, HE, XM5E5.
MIL-W-45480 - Warhead, Guided Missile, He Xm9E3 Parts For
MIL-W-45481 - Warhead, Guided Missile, He, Xm9E3 Loading, Assembling And Packing
MIL-W-45484 - Warhead, Guided Missile, Insert, Xm10E3, Loading, Assembling And Packing
MIL-W-45485 - Warhead, Guided Missile, Inert, Xm10E3, Parts For
MIL-W-46244 - Warhead, Guided Missile, He M17A1 Parts For
MIL-W-46266 - Warhead, Guided Missile, T34E2 Parts For
MIL-W-46267 - Warhead, Guided Missile, H.E., T34E2, Loading, Assembling And Packing
MIL-W-46291 - Warhead, Guided Missile, He, M17A1 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of high explosive warhead designated as Warhead, Guided Missile, HE, M17A1.
MIL-W-46531 - Warhead, Guided Missile, Hb, T46E1, Parts For
MIL-W-46599 - Warhead, Guided Missile, T51 Parts For
MIL-W-46608 - Warhead, Guided Missile, T51 Loading, Assembling And Packing
MIL-W-46609 - Warhead, Guided Missile, He T46E1 Loading, Assembly And Packing
MIL-W-48854 - Warhead Body Assembly, Stinger Parts For
MIL-W-48855 - Warhead Body Assembly For Warhead Section, Gm, He, M258
This specification covers the Quality Assurance Provisions and special requirements for the fabrication of the Warhead Body Assembly for M258 Configuration Stinger Warhead Sections (see 6.1).
MIL-W-48856 - Warhead Sections, Guided Missile, H.E. M258E6 Loading, Assembling And Packing
This specification contains the quality assurance provisions for the loading, assembling, and packing of Warhead Sections, Guided Missile, H.E., M258E6.
MIL-W-48866 - Warhead Section, Gm, Practice Lightweight, M252 And Shipping And Storage Container, Xm612, Spare Parts For
This specification contains requirements not normally covered by the drawings and provides quality assurance provisions for the fabrication of spare parts for the Warhead Section, GM Practice, Lightweight, M252, and Shipping and Storage Container, XM612.
MIL-W-50219 - Warhead Section, Guided Missile, He, M225, Assembling And Packing
This specification contains requirements not covered by the drawings and provides quality assurance provisions for the assembly and packing of one type of warhead section designated as Warhead Section, Guided Missile, HE, M225.
MIL-W-50848 - Warhead, Guided Missile, He, M250 Loading, Assembly And Packing
This specification covers the quality assurance provisions and special requirements not covered by the drawings for the loading, assembly, and packing of one type of warhead designated as Warhead, GM, HE, M250.
MIL-W-50849 - Warhead, Guided Missile, He, M250 Inert Parts For
This specification covers the Quality Assurance Provisions and Special requirements for the fabrication of the inert parts for one type of warhead designated as Warhead, Guided Missile, HE, M250.
MIL-W-60080 - Warhead, Guided Missile, Empty, E6
This specification covers one type of empty warhead.
MIL-W-60081 - Warhead, Guided Missile, Chemical Agent, 1500 Lb, E9
This specification covers a warhead containing GB-filled bombs.
MIL-W-60302 - Warhead, Guided Missile, Chemical Agent Smoke, Mk 69 Mod 0; Wp Filling
This specification covers the white phosphorus (WP) filling and closing (without fuzing components) of the Mk 69 Mod O warhead.
MIL-W-63328 - Warhead Gm, He, M248 Inert Parts For
This document contains the quality assurance provisions and special requirements for the fabrication of the inert parts for one type of warhead designated Warhead, GM, HE, XM248E1.
MIL-W-63329 - Warhead, Gm, He, M248 Loading, Assembly And Packing
This specification covers the Quality Assurance Provisions and special requirements for the loading, assembly and packing of one type of warhead, designated as Warhead, GM, HE, M248.
MIL-W-63388 - Warhead, Guided Missile, He, M207E1 Body And Boattail Bushing For
This specification covers the quality assurance provisions and special requirements not covered by the drawings for the fabrication and packing of body and boattail bushing for M7207E1 Warhead.
MIL-W-63389 - Warhead, Guided Missile, He, M207E1 Liner For
This specification covers the quality assurance provisions and special requirements not covered by the drawings for the fabrication and packing of liner for M207E1 Warhead.
MIL-W-63451 - Warhead, Guided Missile, He, M207E2 Liner For
This specification covers the quality assurance provisions and special requirements not covered by the drawings for the fabrication and packing of liner for M207E2 Warhead.
MIL-W-63452 - Warhead, Guided Missile, He, M207E2 Body And Boattail Bushing For
This specification covers the quality assurance provisions and special requirements not covered by the drawings for the fabrication and packing of body and boattail bushing for the M207E2 Warhead.
MIL-W-63465 - Warhead, Guided Missile, He, M250 Fragments For (No S/S Documents)
This specification contains the quality assurance provisions and special requirements for the fabrication and purchase of tungsten fragments for use in the CHAPARRAL Warhead designated as Warhead, GM, HE, M250.
MIL-W-70948 - Warhead Section, Gm, Practice Xm276 Loading, Assembling And Packing
This specification covers the loading, assembling and packing for one type of warhead section designated as Warhead Section GM Practice XM276 with live FLSC and dummy inert bombs: P?Ms 12598664, 69C7448, or SK 476.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business