NOT MEASUREMENT
SENSITIVE
MIL-DTL-23938B(AS)
28 November 1997
SUPERSEDING
MIL-F-23938A(AS)
1 September 1966
DETAIL SPECIFICATION
FERRIC OXIDE
This specification is approved for use by the Naval Air Systems Command, Department of the
Navy and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the requirements for ferric oxide.
2. APPLICABLE DOCUMENTS
(This section is not applicable to this specification.)
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.3. If changes in the process methods and equipment adversely
affect the characteristics of the material, additional first article samples may be required.
3.2 Chemical and physical requirements Chemical and physical requirements of the ferric oxide shall be in
.
accordance with table I.
3.3 Workmanship. The ferric oxide shall be free from foreign materials. It shall be
manufactured in accordance with standard manufacturing procedures of the industry.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be
of use in improving this document should be addressed to: Commander, Naval Air Warfare Center
Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100, by using the
self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the
end of this document or by letter.
AMSC N/A
FSC 1336
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business