NOT
MEASUREMENT
SENSITIVE
MIL-PRF-23942A(AS)
30 September 1997
SUPERSEDING
MIL-P-23942(AS)
19 August 1964
PERFORMANCE SPECIFICATION
POLYBUTADIENE, LINEAR, CARBOXYL TERMINATED
This specification is approved for use by the Naval Air Systems Command, Department of the
Navy, and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the requirements for two types of carboxyl
terminated linear polybutadiene used in the manufacture of solid propellant grains.
1.2 Classification. The carboxyl terminated linear polybutadiene is of the following types:
Type I - Low acid content
Type II - High acid content
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which
may be of use in improving this document should be addressed to: Commander, Naval Air
Warfare Center Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ
08733-5100, by using the self addressed Standardization Document Improvement Proposal
(DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 1336
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business