MIL-PRF-23950B(AS)
f. Transfer the remaining liquid in a tared aluminum pan and evaporate to dryness.
g. Cool in a desiccator and weigh.
h. Calculate as follows:
Weight of residue in grams
percent Ether extractable = X 100
Weight of sample in grams
4.4.3 Physical properties. The physical properties of the aluminum powder furnished in each
lot shall be in accordance with table II and shall be determined in accordance with ASTM-B330.
Failure to comply with the requirements shall be cause for rejection of the lot. The physical
properties of each lot of material will be determined by the method explained in the following
paragraphs.
4.5 Acceptance criteria. All test results shall indicate compliance with the requirements of
section 3. Failure to meet these requirements shall be cause for rejection of the lot.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in
the contract or order (see 6.2). When actual packaging of material is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain
requisite packaging requirements. Packaging requirements are maintained by the Inventory
Control Point's packaging activity within the Military Department or Defense Agency, or within
the Military Department's or Defense Agency's automated packaging files, CD-ROM products, or
by contacting the responsible packaging activity.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business